AD8008ARZ
| Parameters | |
|---|---|
| Nominal Supply Current | 20.4mA |
| Quiescent Current | 10.2mA |
| Slew Rate | 1000V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 59 dB |
| Current - Input Bias | 4μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 130mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 650MHz |
| Gain Bandwidth Product | 380MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 64dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 500μV |
| Gain | 1 dB |
| Settling Time | 18 ns |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1pF |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8008 |
| Pin Count | 8 |
| Operating Supply Voltage | 9V |
| Number of Channels | 2 |
| Operating Supply Current | 20.4mA |
AD8008ARZ Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. A Current Feedback-type buffer amplifier is shown here. In the case of Tube cases, linear amplifier will be delivered. It is estimated that there will be 8 terminations in the next few months. The total number of pins on linear amplifier is 8. Please take in mind that this instrumentation amplifier should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are available on the instrumentation amplifier. Op amp rates 4mV as input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . An 20.4mA volt supply current is needed for this linear amplifier to operate. It is recommended to keep the voltage gain at 120dB at all times. There are 2 channels on the operational amplifiers. The operating supply voltage of instrumentation amplifier is rated 9V voltage. Buffer amplifier has a quiescent current of 10.2mA.
AD8008ARZ Features
8 Pins
supply voltage of 5V
120dB voltage gain
AD8008ARZ Applications
There are a lot of Analog Devices Inc. AD8008ARZ Instrumentational OP Amps applications.
- Power control
- Proportional counter tubes
- Hand-held batteries
- Portable docking station
- Instrumentation
- earphone
- Cinema or auditorium audio system
- Video amplifiers
- single/dual op amp sum and difference circuits
- Inverse/same-phase proportional circuit
