AD8009JRTZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 750mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8009 |
| Pin Count | 5 |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Operating Supply Current | 16mA |
| Nominal Supply Current | 16mA |
| Power Dissipation | 750mW |
| Output Current | 175mA |
| Quiescent Current | 16mA |
| Slew Rate | 5500V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 52 dB |
| Current - Input Bias | 50μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 175mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 845MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 108dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2mV |
| Settling Time | 10 ns |
| Input Capacitance | 2.6pF |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8009JRTZ-REEL7 Overview
A SC-74A, SOT-753 case is used to package the op amp. A Current Feedback-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. There have been a total of 5 terminations over the past year. It consists of a total of 5 pins in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 5 pins are present on the instrumentation amplifier. There is an input offset voltage of 5mV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. A supply current of 16mA can be used to operate this linear amplifier. It is a member of the 108dB's 108dB family. Instrumentation amplifier has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 9V voltage. There is a quiescent current of 16mA in this operational amplifier circuit.
AD8009JRTZ-REEL7 Features
5 Pins
supply voltage of 5V
108dB voltage gain
AD8009JRTZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8009JRTZ-REEL7 Instrumentational OP Amps applications.
- Division circuits
- Automotive sensors
- Industrial control system
- Voltage regulation circuit
- Proportional operation circuits
- Power transmission
- Strain gauges
- Medical instruments
- Weak signal detection
- Image computer boards
