banner_page

AD8010ARZ-16

1 Channels 200mA per Channel 10μA 54 dB Instrumentational OP Amps 9V~12V ±4.5V~6V AD8010 16 Pins 16-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-AD8010ARZ-16
  • Package: 16-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 602
  • Description: 1 Channels 200mA per Channel 10μA 54 dB Instrumentational OP Amps 9V~12V ±4.5V~6V AD8010 16 Pins 16-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number AD8010
Pin Count 16
Power Supplies +-5V
Number of Channels 1
Operating Supply Current 17mA
Nominal Supply Current 17mA
Output Current 200mA
Quiescent Current 17mA
Slew Rate 800V/μs
Amplifier Type Current Feedback
Common Mode Rejection Ratio 54 dB
Current - Input Bias 10μA
Voltage - Supply, Single/Dual (±) 9V~12V ±4.5V~6V
Output Current per Channel 200mA
Input Offset Voltage (Vos) 5mV
Bandwidth 230MHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 90000 kHz
Voltage Gain 114dB
Power Supply Rejection Ratio (PSRR) 66dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 6.3V
Low-Bias NO
Micropower NO
Programmable Power NO
Input Capacitance 2.75pF
Neg Supply Voltage-Max (Vsup) -6.3V
Height Seated (Max) 2.65mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 month ago)
Mounting Type Surface Mount
Package / Case 16-SOIC (0.295, 7.50mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Operational Amplifier
Packing Method TAPE AND REEL
Technology BIPOLAR

AD8010ARZ-16 Overview


Packaging for the buffer amplifier is in the form of a 16-SOIC (0.295, 7.50mm Width) case. The instrumentation amplifier in this picture is of the Current Feedback-type. Linear amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 16. A total of 16 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 16 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 5mV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using a supply current of 17mA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 114dB at all times. On the buffer amps, there are 1 channels that can be used. The instrumentation amplifier is packed in the form of TAPE AND REEL. There is an 17mA quiescent current in linear amplifier.

AD8010ARZ-16 Features


16 Pins
supply voltage of 5V
114dB voltage gain

AD8010ARZ-16 Applications


There are a lot of Analog Devices Inc. AD8010ARZ-16 Instrumentational OP Amps applications.

  • Logarithmic operation circuits
  • Switching amplifier
  • Weak signal detection
  • Laptop
  • Signal filtering
  • Mobile phone
  • Home audio systems
  • Proportional operation circuits
  • Multiplication circuits
  • Strain gauges

Write a review

Note: HTML is not translated!
    Bad           Good