Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 4 months ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Operational Amplifier |
Max Power Dissipation |
600mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8012 |
Pin Count |
8 |
Number of Channels |
2 |
Operating Supply Current |
1.8mA |
Power Dissipation |
600mW |
Quiescent Current |
900μA |
Slew Rate |
2250V/μs |
Amplifier Type |
Current Feedback |
Common Mode Rejection Ratio |
60 dB |
Current - Input Bias |
3μA |
Voltage - Supply, Single/Dual (±) |
3V~12V ±1.5V~6V |
Output Current per Channel |
125mA |
Input Offset Voltage (Vos) |
4mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Voltage Gain |
114dB |
Average Bias Current-Max (IIB) |
15μA |
Power Supply Rejection Ratio (PSRR) |
60dB |
Supply Voltage Limit-Max |
6.3V |
Voltage - Input Offset |
1.5mV |
Settling Time |
35 ns |
-3db Bandwidth |
350MHz |
Input Capacitance |
2.3pF |
Neg Supply Voltage-Max (Vsup) |
-6.3V |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8012ARMZ-REEL7 Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. With regards to the offset voltage of the input, buffer amplifier is rated at 4mV. Surface Mount is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using an 1.8mA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 114dB is the best course of action. As far as the device is concerned, buffer amplifier has 2 channels. There is an 900μA quiescent current running through op amp ic.
AD8012ARMZ-REEL7 Features
8 Pins
supply voltage of 5V
114dB voltage gain
AD8012ARMZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8012ARMZ-REEL7 Instrumentational OP Amps applications.
- Voltage regulation circuit
- Weighing systems
- Band-pass filter
- Image computer boards
- Exponential operation circuits
- Navigation
- Multiplication circuits
- Gaming industry
- Micro signal measurement
- Professional videography