AD8012ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 800mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8012 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Operating Supply Current | 1.8mA |
| Power Dissipation | 800mW |
| Quiescent Current | 900μA |
| Slew Rate | 2250V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 125mA |
| Input Offset Voltage (Vos) | 4mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 114dB |
| Average Bias Current-Max (IIB) | 15μA |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1.5mV |
| Settling Time | 35 ns |
| -3db Bandwidth | 350MHz |
| Input Capacitance | 2.3pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8012ARZ-REEL7 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are available on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 4mV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureThis op amp can operate from a supply current at 1.8mA. It is recommended to keep the voltage gain at 114dB at all times. There are 2 channels on the operational amplifiers. 900μA quiescent currents are flowing through buffer op amp.
AD8012ARZ-REEL7 Features
8 Pins
supply voltage of 5V
114dB voltage gain
AD8012ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8012ARZ-REEL7 Instrumentational OP Amps applications.
- Hand-held batteries
- Medical imaging
- Comparator
- PDA
- Cinema or auditorium audio system
- Scintillation detectors
- Automation control systems
- Voltage regulation circuit
- single/dual op amp sum and difference circuits
- Proportional counter tubes
