AD8014ARTZ-R2
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8014 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 1.15mA |
| Nominal Supply Current | 1.3mA |
| Power Dissipation | 500mW |
| Quiescent Current | 1.3mA |
| Slew Rate | 4600V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 57 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~12V ±2.25V~6V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 400MHz |
| Gain Bandwidth Product | 480MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 55dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Low-Bias | NO |
| Micropower | NO |
| Max Frequency | 10kHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2.3pF |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8014ARTZ-R2 Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the Current Feedback-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations is approaching the 5 mark. A total of 5 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 5 pins. Op amp rates 2mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, this op amp functions well at -40°C~85°C. It is possible to operate this buffer amplifier from a supply current of 1.15mA . There are a total of 1 channels available on the op amps. The operating supply voltage of instrumentation amplifier is rated 5V voltage. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. Currently, linear amplifier is operating with a quiescent current of 1.3mA.
AD8014ARTZ-R2 Features
5 Pins
supply voltage of 5V
AD8014ARTZ-R2 Applications
There are a lot of Analog Devices Inc. AD8014ARTZ-R2 Instrumentational OP Amps applications.
- Switching amplifier
- Image computer boards
- Digital cameras
- Power generator
- Comparator
- Wireless base stations
- Medical instruments
- Signal filtering
- Radiation thermometry transducers
- Division circuits
