AD8014ARTZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8014 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 1.3mA |
| Power Dissipation | 500mW |
| Output Current | 50mA |
| Quiescent Current | 1.3mA |
| Slew Rate | 4600V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 57 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~12V ±2.25V~6V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 400MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 123dB |
| Power Supply Rejection Ratio (PSRR) | 58dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2mV |
| Settling Time | 24 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 480MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2.3pF |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8014ARTZ-REEL7 Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the Current Feedback-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. It is estimated that there will be 5 terminations in the next few months. A total of 5 pins are located on this board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The buffer op amp includes 5 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 5mV. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 1.3mA . 123dB should be the voltage gain. Instrumentation amplifier has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 5V voltage. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. Buffer amplifier has a quiescent current of 1.3mA.
AD8014ARTZ-REEL7 Features
5 Pins
supply voltage of 5V
123dB voltage gain
AD8014ARTZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8014ARTZ-REEL7 Instrumentational OP Amps applications.
- MP3
- Cinema or auditorium audio system
- Video conversion and routing
- Industrial applications including automation
- RF cable systems
- Fast A/D and D/A converters
- Switching amplifier
- Radiation thermometry transducers
- High-frequency data acquisition systems
- Logarithmic operation circuits
