AD8014ARZ
| Parameters | |
|---|---|
| Common Mode Rejection Ratio | 57 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~12V ±2.25V~6V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 400MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 123dB |
| Power Supply Rejection Ratio (PSRR) | 58dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2mV |
| Settling Time | 24 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 480MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2.3pF |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 750mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8014 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 1.3mA |
| Power Dissipation | 750mW |
| Output Current | 50mA |
| Quiescent Current | 1.3mA |
| Slew Rate | 4600V/μs |
| Amplifier Type | Current Feedback |
AD8014ARZ Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the Current Feedback type. Linear amplifier is delivered in a Tube case. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 8 pins. The input offset voltage is 5mV. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . You can run this op amp ic on 1.3mA . It is a member of the 123dB's 123dB family. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of the buffer op amp is rated at 5V. Linear amplifier has a quiescent current of 1.3mA.
AD8014ARZ Features
8 Pins
supply voltage of 5V
123dB voltage gain
AD8014ARZ Applications
There are a lot of Analog Devices Inc. AD8014ARZ Instrumentational OP Amps applications.
- Automotive sensors
- High/low-pass filter circuit
- Automatic control
- Precision measurement
- Video data acquisition
- Micro signal measurement
- Navigation
- Communication device
- Industrial control system
- Professional videography
