AD8014ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 750mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8014 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 1.3mA |
| Power Dissipation | 750mW |
| Output Current | 50mA |
| Quiescent Current | 1.3mA |
| Slew Rate | 4600V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 57 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~12V ±2.25V~6V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 400MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 123dB |
| Power Supply Rejection Ratio (PSRR) | 58dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2mV |
| Settling Time | 24 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 480MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2.3pF |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8014ARZ-REEL7 Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Buffer amps of this type are called Current Feedback-types. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There have been a total of 8 terminations over the past year. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, buffer amplifier rates 5mV voltage. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. Operational amplifier can operate supply current at 1.3mA. There should be no change in the voltage gain at 123dB. There are 1 channels on the operational amplifiers. The operating supply voltage of instrumentation amplifier is rated 5V voltage. TAPE AND REEL is adopted to pack the instrumentation amplifier. Linear amplifier has a quiescent current of 1.3mA.
AD8014ARZ-REEL7 Features
8 Pins
supply voltage of 5V
123dB voltage gain
AD8014ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8014ARZ-REEL7 Instrumentational OP Amps applications.
- Video computer boards
- Proportional counter tubes
- Inverse/same-phase proportional circuit
- MP3
- Digital cameras
- Measurements of Wheatstone bridge
- Band-pass filter
- Signal amplification
- Automation control systems
- High/low-pass filter circuit
