AD8017AR
| Parameters | |
|---|---|
| -3db Bandwidth | 160MHz |
| Bias Current-Max (IIB) @25C | 35μA |
| Programmable Power | NO |
| Input Capacitance | 2.4pF |
| Neg Supply Voltage-Max (Vsup) | -6.6V |
| Wideband | YES |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8017 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 7mA |
| Power Dissipation | 1.3W |
| Quiescent Current | 7.7mA |
| Supply Current-Max | 15.6mA |
| Slew Rate | 1600V/μs |
| Architecture | CURRENT-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 63 dB |
| Current - Input Bias | 16μA |
| Voltage - Supply, Single/Dual (±) | 4.4V~12V ±2.2V~6V |
| Output Current per Channel | 270mA |
| Input Offset Voltage (Vos) | 1.8mV |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 100000 kHz |
| Voltage Gain | 117dB |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.6V |
| Low-Bias | NO |
| Micropower | NO |
AD8017AR Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. It is important to remember that this op amp should be operated at a voltage of 2.5V volts. It should be noted that this op amp is a type of Operational Amplifier device. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1.8mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . A supply current of 7mA can be used to operate this linear amplifier. 117dB should be the voltage gain. This op amp ic has 2 circuits. There are 2 channels on the operational amplifiers. The current is quiescent at 7.7mA.
AD8017AR Features
8 Pins
supply voltage of 2.5V
117dB voltage gain
AD8017AR Applications
There are a lot of Analog Devices Inc. AD8017AR Instrumentational OP Amps applications.
- High input resistance broadband
- Computer workstations
- Division circuits
- Inverse/same-phase proportional circuit
- High speed sample
- Digital cameras
- Medical imaging
- Cinema or auditorium audio system
- Image computer boards
- Band-stop filter
