AD8017AR-REEL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8017 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 7mA |
| Quiescent Current | 7.7mA |
| Supply Current-Max | 15.6mA |
| Slew Rate | 1600V/μs |
| Architecture | CURRENT-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 63 dB |
| Current - Input Bias | 16μA |
| Voltage - Supply, Single/Dual (±) | 4.4V~12V ±2.2V~6V |
| Output Current per Channel | 270mA |
| Input Offset Voltage (Vos) | 1.8mV |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 100000 kHz |
| Voltage Gain | 117dB |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.6V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 160MHz |
| Bias Current-Max (IIB) @25C | 35μA |
| Programmable Power | NO |
| Input Capacitance | 2.4pF |
| Neg Supply Voltage-Max (Vsup) | -6.6V |
| Wideband | YES |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8017AR-REEL7 Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Op amps are General Purpose types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. Please take in mind that op amp should be run at 2.5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. Linear amplifier includes 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 1.8mV. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. It is possible to operate this buffer amplifier from a supply current of 7mA . The voltage gain should stay at 117dB. On this instrumentation amplifier, there are 2 circuits that are connected together. The op amp ic has 2 channels on it. This linear amplifier pack is based on the TAPE AND REEL axis. 7.7mA quiescent currents are flowing through buffer op amp.
AD8017AR-REEL7 Features
8 Pins
supply voltage of 2.5V
117dB voltage gain
AD8017AR-REEL7 Applications
There are a lot of Analog Devices Inc. AD8017AR-REEL7 Instrumentational OP Amps applications.
- High gain DC amplifier
- Subtraction operation circuits
- Television broadcasting equipment
- Weighing systems
- Communication device
- Multiplication circuits
- Integrator circuits
- Semiconductor detectors
- E-book readers
- Comparator
