AD8017ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8017 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 15.4mA |
| Power Dissipation | 1.3W |
| Quiescent Current | 7.7mA |
| Supply Current-Max | 15.6mA |
| Slew Rate | 1600V/μs |
| Architecture | CURRENT-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 63 dB |
| Current - Input Bias | 16μA |
| Voltage - Supply, Single/Dual (±) | 4.4V~12V ±2.2V~6V |
| Output Current per Channel | 270mA |
| Input Offset Voltage (Vos) | 1.8mV |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 100000 kHz |
| Voltage Gain | 117dB |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.6V |
| Settling Time | 35 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 160MHz |
| Bias Current-Max (IIB) @25C | 35μA |
| Programmable Power | NO |
| Input Capacitance | 2.4pF |
| Neg Supply Voltage-Max (Vsup) | -6.6V |
| Wideband | YES |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8017ARZ-REEL7 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 8. The pins on this board total to 8 in total. As a reminder, this buffer op amp should be powered by 2.5V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. Linear amplifier includes 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 1.8mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. As long as the supply current of the chip does not exceed 15.4mA, this op amp ic can operate. It is recommended to keep the voltage gain at 117dB at all times. On this instrumentation amplifier, there are 2 circuits that are connected together. Instrumentation amplifier has 2 channels on it. It is used TAPE AND REEL to pack the op amps. As a result, linear amplifier's quiescent current is 7.7mA.
AD8017ARZ-REEL7 Features
8 Pins
supply voltage of 2.5V
117dB voltage gain
AD8017ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8017ARZ-REEL7 Instrumentational OP Amps applications.
- ECG equipment
- Band-stop filter
- Weak signal detection
- High/low-pass filter circuit
- Radar
- Television
- Portable electronic products powered by batteries
- PDA
- Home audio systems
- Computer workstations
