AD8021ARM
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8021 |
| Pin Count | 8 |
| Operating Supply Voltage | 10V |
| Number of Channels | 1 |
| Operating Supply Current | 7.8mA |
| Nominal Supply Current | 7.7mA |
| Output Current | 60mA |
| Quiescent Current | 7.7mA |
| Slew Rate | 460V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 98 dB |
| Current - Input Bias | 7.5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~24V ±2.25V~12V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 400μV |
| Bandwidth | 560000 kHz |
| Gain Bandwidth Product | 1 GHz |
| Voltage Gain | 76dB |
| Power Supply Rejection Ratio (PSRR) | 74dB |
| Settling Time | 23 ns |
| -3db Bandwidth | 560MHz |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1pF |
| Consumer IC Type | VIDEO AMPLIFIER |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8021ARM Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. An op amp ic of the Voltage Feedback type. There is a Tube case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins. It has 8 pins that make up the linear amplifier. Op amp rates 400μV as input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~85°C. You can run this op amp ic on 7.8mA . It is a member of the 76dB's 76dB family. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of the buffer op amp is rated at 10V. There is an 7.7mA quiescent current in linear amplifier. Using VIDEO AMPLIFIER, you can sort the electric component based on the type of consumer IC that is included.
AD8021ARM Features
8 Pins
76dB voltage gain
AD8021ARM Applications
There are a lot of Analog Devices Inc. AD8021ARM Instrumentational OP Amps applications.
- Computer workstations
- Commercial audio systems
- Differentiator circuits
- Fission chambers
- Biopotential
- Division circuits
- Cinema or auditorium audio system
- Addition operation circuits
- Inverse/same-phase proportional circuit
- Signal filtering
