AD8021ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8021 |
| Pin Count | 8 |
| Operating Supply Voltage | 10V |
| Number of Channels | 1 |
| Operating Supply Current | 7.7mA |
| Nominal Supply Current | 7.7mA |
| Output Current | 60mA |
| Quiescent Current | 7.7mA |
| Slew Rate | 460V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 98 dB |
| Current - Input Bias | 7.5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~24V ±2.25V~12V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 560MHz |
| Gain Bandwidth Product | 1 GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 76dB |
| Power Supply Rejection Ratio (PSRR) | 95dB |
| Voltage - Input Offset | 400μV |
| Settling Time | 23 ns |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1pF |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8021ARZ Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Op amps are Voltage Feedback types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 1mV. This electronic part is best mounted with type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. You can run this op amp ic on 7.7mA . 76dB should remain the voltage gain. Instrumentation amplifier has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 10V voltage. The quiescent current is 7.7mA.
AD8021ARZ Features
8 Pins
supply voltage of 5V
76dB voltage gain
AD8021ARZ Applications
There are a lot of Analog Devices Inc. AD8021ARZ Instrumentational OP Amps applications.
- Weighing systems
- E-book readers
- Mobile phone
- Semiconductor detectors
- MP3
- Video computer boards
- Computer workstations
- High-frequency data acquisition systems
- Medical imaging
- Commercial audio systems
