AD8022AR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.6W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8022 |
| Pin Count | 8 |
| Operating Supply Voltage | 12V |
| Number of Channels | 2 |
| Operating Supply Current | 4mA |
| Power Dissipation | 1.6W |
| Quiescent Current | 5.5mA |
| Slew Rate | 50V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 98 dB |
| Current - Input Bias | 2.5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~26V ±2.25V~13V |
| Output Current per Channel | 55mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Gain Bandwidth Product | 100MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 72dB |
| Average Bias Current-Max (IIB) | 7.5μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 130MHz |
| Bias Current-Max (IIB) @25C | 5μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Wideband | YES |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8022AR Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tube case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. This linear amplifier should be powered by an 2.5V battery. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. Op amp ic rates 1.5mV for input offset voltage. This electronic part is best mounted with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. As long as the supply current of the chip does not exceed 4mA, this op amp ic can operate. Op amp is a member of the 72dB's 72dB family. As far as the device is concerned, buffer amplifier has 2 channels. The operating supply voltage of instrumentation amplifier is rated 12V voltage. Buffer amplifier has a quiescent current of 5.5mA.
AD8022AR Features
8 Pins
supply voltage of 2.5V
72dB voltage gain
AD8022AR Applications
There are a lot of Analog Devices Inc. AD8022AR Instrumentational OP Amps applications.
- Television broadcasting equipment
- Portable docking station
- Signal amplification
- Car stereo
- Navigation
- Measurements of Wheatstone bridge
- Industrial applications including automation
- Multimedia playback equipment
- Displayers for aircraft and air transportation control systems
- High/low-pass filter circuit
