AD8022ARMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.2W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8022 |
| Pin Count | 8 |
| Operating Supply Voltage | 24V |
| Number of Channels | 2 |
| Operating Supply Current | 11mA |
| Power Dissipation | 1.2W |
| Quiescent Current | 4mA |
| Slew Rate | 50V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 98 dB |
| Current - Input Bias | 2.5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~26V ±2.25V~13V |
| Output Current per Channel | 55mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 130MHz |
| Gain Bandwidth Product | 100MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 120000 kHz |
| Voltage Gain | 72dB |
| Average Bias Current-Max (IIB) | 7.5μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.5mV |
| Settling Time | 62 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 5μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8022ARMZ Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. There are two types of operational amplifiers in this circuit. A Tube case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. It consists of a total of 8 pins in total. The linear amplifier should be run at 2.5V at all times, so please keep that in mind when using it. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 6mV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Using a supply current of 11mA , this buffer op amp will be able to operate. Maintain 72dB as the voltage gain. On the buffer amps, there are 2 channels that can be used. The operating supply voltage of instrumentation amplifier is rated 24V voltage. 4mA quiescent currents are flowing through buffer op amp.
AD8022ARMZ Features
8 Pins
supply voltage of 2.5V
72dB voltage gain
AD8022ARMZ Applications
There are a lot of Analog Devices Inc. AD8022ARMZ Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- Image computer boards
- Oscilloscopes
- Comparator
- Automatic control
- Mobile phone
- Power generator
- Blood pressure sensors
- Power control
- pH (acidity)
