AD8022ARZ-REEL7
| Parameters | |
|---|---|
| Slew Rate | 50V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 98 dB |
| Current - Input Bias | 2.5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~26V ±2.25V~13V |
| Output Current per Channel | 55mA |
| Input Offset Voltage (Vos) | 6mV |
| Gain Bandwidth Product | 100MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 72dB |
| Average Bias Current-Max (IIB) | 7.5μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.5mV |
| Settling Time | 62 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 130MHz |
| Bias Current-Max (IIB) @25C | 5μA |
| Programmable Power | NO |
| Wideband | YES |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 1.6W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8022 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Operating Supply Current | 11mA |
| Quiescent Current | 4mA |
AD8022ARZ-REEL7 Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a Voltage Feedback-type. The op amp is delivered to you in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. The pins on this board total to 8 in total. The linear amplifier should be run at 2.5V at all times, so please keep that in mind when using it. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 6mV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 11mA and 10 . There should be no change in the voltage gain. There are 2 channels on the operational amplifiers. The instrumentation amplifier is packed in the form of TAPE AND REEL. As a result, linear amplifier's quiescent current is 4mA.
AD8022ARZ-REEL7 Features
8 Pins
supply voltage of 2.5V
72dB voltage gain
AD8022ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8022ARZ-REEL7 Instrumentational OP Amps applications.
- Integrator circuits
- Image computer boards
- Broadcasting
- Information processing
- Communication
- Blood pressure sensors
- Division circuits
- Band-stop filter
- Band-pass filter
- Gaming industry
