AD8024ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 7.5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8024 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Operating Supply Current | 68mA |
| Nominal Supply Current | 68mA |
| Output Current | 50mA |
| Quiescent Current | 17mA |
| Slew Rate | 390V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 66 dB |
| Current - Input Bias | 1μA |
| Voltage - Supply, Single/Dual (±) | 5V~24V ±2.5V~12V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 200MHz |
| Neg Supply Voltage-Nom (Vsup) | -7.5V |
| Voltage Gain | 280dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 13V |
| Voltage - Input Offset | 2mV |
| Settling Time | 18 ns |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -13V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8024ARZ-REEL7 Overview
In the package, you will find a 16-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 16 terminations. It consists of a total of 16 pins in total. It is important to remember that this op amp should be operated at a voltage of 7.5V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 16 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 5mV. For this electronic part, it is recommended that you mount it with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. This op amp can operate from a supply current at 68mA. It is recommended to keep the voltage gain at 280dB at all times. As far as the device is concerned, buffer amplifier has 4 channels. 17mA quiescent currents are flowing through buffer op amp.
AD8024ARZ-REEL7 Features
16 Pins
supply voltage of 7.5V
280dB voltage gain
AD8024ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8024ARZ-REEL7 Instrumentational OP Amps applications.
- Polarized electrodes
- Scintillation detectors
- Signal operation
- single/dual op amp sum and difference circuits
- Image computer boards
- Test equipment
- High input resistance broadband
- Power generator
- Power transmission
- Signal amplification
