AD8027ARTZ-R2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8027 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 9V |
| Number of Elements | 1 |
| Operating Supply Current | 8.5mA |
| Nominal Supply Current | 8.5mA |
| Quiescent Current | 6mA |
| Slew Rate | 100V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 4μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 190MHz |
| Gain Bandwidth Product | 190MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 105dB |
| Power Supply Rejection Ratio (PSRR) | 107dB |
| Low-Offset | YES |
| Voltage - Input Offset | 200μV |
| Settling Time | 35 ns |
| -3db Bandwidth | 190MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2pF |
| Height | 1.15mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8027ARTZ-R2 Overview
Op amp is packaged in SOT-23-6 case. An op amp ic of the Voltage Feedback type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. In recent months, the number of terminations has approached 6. A total of 6 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 6 pins that make up the linear amplifier. Op amp ic rates 900μV for input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. An 8.5mA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 105dB. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. 1 elements make up the design of this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 9V voltage. There is a quiescent current of 6mA in this operational amplifier circuit.
AD8027ARTZ-R2 Features
6 Pins
supply voltage of 5V
105dB voltage gain
Output Type: Rail-to-Rail
AD8027ARTZ-R2 Applications
There are a lot of Analog Devices Inc. AD8027ARTZ-R2 Instrumentational OP Amps applications.
- Proportional counter tubes
- Industrial control system
- High-frequency data acquisition systems
- Scintillation detectors
- Automation control systems
- Thermocouples
- Logarithmic operation circuits
- Comparator
- Broadcasting
- Ultrasound transducers
