AD8027ARTZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8027 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 8.5mA |
| Quiescent Current | 6mA |
| Slew Rate | 100V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 4μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 190MHz |
| Gain Bandwidth Product | 190MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 105dB |
| Power Supply Rejection Ratio (PSRR) | 107dB |
| Low-Offset | YES |
| Voltage - Input Offset | 200μV |
| Settling Time | 35 ns |
| -3db Bandwidth | 190MHz |
| Programmable Power | NO |
| Input Capacitance | 2pF |
| Input Voltage Noise Density | 4.3nV/sqrt Hz |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8027ARTZ-REEL7 Overview
There is a SOT-23-6 case in which the instrumentation amplifier is packaged. This is a Voltage Feedback type op amp. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 6 mark. In this case, there are 6 pins on the board. Please take in mind that this instrumentation amplifier should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 6 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 900μV. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using a supply current of 8.5mA , this buffer op amp will be able to operate. You should keep the voltage gain at 105dB for the time being. On the buffer amps, there are 1 channels that can be used. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a result, linear amplifier's quiescent current is 6mA.
AD8027ARTZ-REEL7 Features
6 Pins
supply voltage of 5V
105dB voltage gain
Output Type: Rail-to-Rail
AD8027ARTZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8027ARTZ-REEL7 Instrumentational OP Amps applications.
- Active probe
- Comparator
- Portable electronic products powered by batteries
- Band-pass filter
- Digital cameras
- High/low-pass filter circuit
- Multiplication circuits
- Professional videography
- Logarithmic operation circuits
- High-frequency data acquisition systems
