AD8027ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8027 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 8.5mA |
| Nominal Supply Current | 8.5mA |
| Output Current | 5mA |
| Quiescent Current | 6mA |
| Slew Rate | 100V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 4μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 190MHz |
| Gain Bandwidth Product | 190MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 105dB |
| Average Bias Current-Max (IIB) | 6μA |
| Power Supply Rejection Ratio (PSRR) | 107dB |
| Low-Offset | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 200μV |
| Gain | 1 dB |
| Settling Time | 35 ns |
| -3db Bandwidth | 190MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8027ARZ Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called Voltage Feedback-types. Instrumentation amplifier is delivered in a Tube case. A total of 8 terminations have been reported in the past few weeks. In total, there are 8 pins on this op amp ic. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 900μV. Surface Mount is the recommended mounting type for this linear amplifier. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 8.5mA . 105dB should be the voltage gain. Buffer op amp is equipped with 1 channels on the device. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. There is an 6mA quiescent current in linear amplifier.
AD8027ARZ Features
8 Pins
supply voltage of 5V
105dB voltage gain
Output Type: Rail-to-Rail
AD8027ARZ Applications
There are a lot of Analog Devices Inc. AD8027ARZ Instrumentational OP Amps applications.
- Weak signal detection
- Differentiator circuits
- Band-stop filter
- Television
- Measurements of Wheatstone bridge
- Strain gauges
- Instrumentation
- Subtraction operation circuits
- Broadcasting
- Proportional operation circuits
