AD8027ARZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8027 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 8.5mA |
| Nominal Supply Current | 8.5mA |
| Output Current | 5mA |
| Quiescent Current | 6mA |
| Slew Rate | 100V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 4μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 190MHz |
| Gain Bandwidth Product | 190MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 105dB |
| Average Bias Current-Max (IIB) | 6μA |
| Power Supply Rejection Ratio (PSRR) | 107dB |
| Low-Offset | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 200μV |
| Settling Time | 35 ns |
| -3db Bandwidth | 190MHz |
| Programmable Power | NO |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8027ARZ-REEL Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Voltage Feedback-type instrumentation amplifiers are used in this application. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are located on this board. I would like to remind you that this buffer op amp should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 900μV. Surface Mount is the recommended mounting type of operational amplifiers. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureAn 8.5mA volt supply current is needed for this linear amplifier to operate. It is recommended to keep the voltage gain at 105dB at all times. 1 channels are available on the instrumentation amplifier. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. Linear amplifier has a quiescent current of 6mA.
AD8027ARZ-REEL Features
8 Pins
supply voltage of 5V
105dB voltage gain
Output Type: Rail-to-Rail
AD8027ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD8027ARZ-REEL Instrumentational OP Amps applications.
- pH (acidity)
- Medical imaging
- Division circuits
- Ultrasound transducers
- Oscilloscopes
- Portable docking station
- High-frequency data acquisition systems
- Addition operation circuits
- Switching amplifier
- Signal amplification
