AD8028ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8028 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 17mA |
| Nominal Supply Current | 17mA |
| Output Current | 5mA |
| Quiescent Current | 6mA |
| Slew Rate | 100V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 4μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 190MHz |
| Gain Bandwidth Product | 190MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 105dB |
| Average Bias Current-Max (IIB) | 6μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 200μV |
| Gain | 1 dB |
| Settling Time | 35 ns |
| -3db Bandwidth | 190MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Input Offset Current-Max (IIO) | 9μA |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8028ARZ Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Op amps are Voltage Feedback types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. Instrumentation amplifier is a part of Operational Amplifier. An 8-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 900μV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 17mA . There should be no change in the voltage gain at 105dB. The op amp ic has 2 channels on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. There is an 6mA quiescent current in linear amplifier.
AD8028ARZ Features
8 Pins
supply voltage of 5V
105dB voltage gain
Output Type: Rail-to-Rail
AD8028ARZ Applications
There are a lot of Analog Devices Inc. AD8028ARZ Instrumentational OP Amps applications.
- Portable media players
- Radar
- Professional videography
- Switching amplifier
- Vehicle electronics
- E-book readers
- Fission chambers
- Navigation
- Micro signal measurement
- Information processing
