AD8029AKSZ-REEL7
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8029 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.5mA |
| Output Current | 5mA |
| Quiescent Current | 1.5mA |
| Slew Rate | 63V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 1.7μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 170mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 125MHz |
| Gain Bandwidth Product | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 74dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Settling Time | 80 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 2.8μA |
| Programmable Power | NO |
| Input Capacitance | 2pF |
| Length | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
AD8029AKSZ-REEL7 Overview
In the package, you will find a 6-TSSOP, SC-88, SOT-363-case to contain the op amp ic. An op amp of this type is a General Purpose-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. It is estimated that there will be at least 6 terminations this year. In this case, there are 6 pins on the board. It is important to remember that this op amp should be operated at a voltage of 5V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 6 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 1.5mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. Op amp ic has 1 channels. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The linear amplifier is packaged by using a TAPE AND REEL axis. There is an 1.5mA quiescent current in linear amplifier.
AD8029AKSZ-REEL7 Features
6 Pins
supply voltage of 5V
74dB voltage gain
Output Type: Rail-to-Rail
AD8029AKSZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8029AKSZ-REEL7 Instrumentational OP Amps applications.
- Test equipment
- Band-pass filter
- Power generator
- Video computer boards
- Oscilloscopes
- Biopotential
- Laptop
- Commercial audio systems
- Tablets
- Wireless base stations
