AD8029AR-REEL
| Parameters | |
|---|---|
| Package / Case | R |
| Surface Mount | YES |
| Number of Pins | 8 |
| Packaging | Tape and Reel |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| Temperature Grade | AUTOMOTIVE |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1.5mA |
| Quiescent Current | 1.5mA |
| Slew Rate | 62 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 700nA |
| Input Offset Voltage (Vos) | 1.6mV |
| Gain Bandwidth Product | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 74dB |
| Power Supply Rejection Ratio (PSRR) | 73dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 6V |
| Low-Bias | NO |
| Micropower | NO |
| Min Dual Supply Voltage | 1.35V |
| Programmable Power | NO |
| Wideband | YES |
| Capacitance - Input | 2pF |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
AD8029AR-REEL Overview
Packaged in a R case, the buffer op amp is ready to use. In the case of Tape and Reel cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 8. In total, there are 8 pins on this op amp ic. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. Linear amplifier includes 8 pins. Op amp ic rates 1.6mV for input offset voltage. You should keep the voltage gain at 74dB for the time being. During the manufacturing process, this buffer amplifier is divided into 1 circuits. Using this buffer op amp requires a temperature of at least -40°C. No temperature greater than 125°C should be used. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 12V. It is advised to keep the op amp's supply voltage higher than 2.7V. It is recommended that you conduct this electronic part using the dual supply voltage of 6V. As a result, linear amplifier's quiescent current is 1.5mA.
AD8029AR-REEL Features
8 Pins
supply voltage of 5V
74dB voltage gain
AD8029AR-REEL Applications
There are a lot of Analog Devices, Inc. AD8029AR-REEL Instrumentational OP Amps applications.
- Information processing
- Proportional operation circuits
- Multimedia playback equipment
- Fission chambers
- Addition operation circuits
- Power generator
- Radiation thermometry transducers
- Video amplifiers
- Semiconductor detectors
- Measurements of Wheatstone bridge
