AD8032ANZ
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Base Part Number | AD8032 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Operating Supply Current | 3.2mA |
| Nominal Supply Current | 3.2mA |
| Power Dissipation | 1.3W |
| Output Current | 15mA |
| Max Supply Current | 800μA |
| Quiescent Current | 900μA |
| Slew Rate | 35V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 450nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 80MHz |
| Gain Bandwidth Product | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 80000 kHz |
| Voltage Gain | 82dB |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1mV |
| Settling Time | 125 ns |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.6pF |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.3W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
AD8032ANZ Overview
Op amp is packaged in 8-DIP (0.300, 7.62mm) case. There are two types of operational amplifiers in this circuit. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. Linear amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 1.5mV. It is recommended that this electronic component be mounted using the Through Hole mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . You can run this op amp ic on 3.2mA . 82dB should remain the voltage gain. The op amp ic has 2 channels on it. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage. The current is quiescent at 900μA.
AD8032ANZ Features
8 Pins
supply voltage of 5V
82dB voltage gain
Output Type: Rail-to-Rail
AD8032ANZ Applications
There are a lot of Analog Devices Inc. AD8032ANZ Instrumentational OP Amps applications.
- Proportional operation circuits
- Multiplication circuits
- Hand-held batteries
- RF cable systems
- Medical instruments
- Medical imaging
- Integrator circuits
- Automotive sensors
- High/low-pass filter circuit
- Multimedia playback equipment
