Parameters |
Gain Bandwidth Product |
40MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
80000 kHz |
Voltage Gain |
82dB |
Power Supply Rejection Ratio (PSRR) |
86dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6.3V |
Low-Bias |
NO |
Micropower |
NO |
-3db Bandwidth |
80MHz |
Programmable Power |
NO |
Dual Supply Voltage |
5V |
Input Capacitance |
1.6pF |
Neg Supply Voltage-Max (Vsup) |
-6.3V |
Wideband |
YES |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
2 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8032 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Number of Channels |
2 |
Operating Supply Current |
900μA |
Nominal Supply Current |
3.2mA |
Power Dissipation |
800mW |
Output Current |
15mA |
Quiescent Current |
1.6mA |
Slew Rate |
35V/μs |
Amplifier Type |
Voltage Feedback |
Common Mode Rejection Ratio |
90 dB |
Current - Input Bias |
450nA |
Voltage - Supply, Single/Dual (±) |
2.7V~12V ±1.35V~6V |
Output Current per Channel |
15mA |
Input Offset Voltage (Vos) |
1mV |
AD8032AR-REEL7 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. A Voltage Feedback-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. A total of 8 pins are located on this board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Using an 900μA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. TAPE AND REEL is adopted to pack the instrumentation amplifier. The current is quiescent at 1.6mA.
AD8032AR-REEL7 Features
8 Pins
supply voltage of 5V
82dB voltage gain
Output Type: Rail-to-Rail
AD8032AR-REEL7 Applications
There are a lot of Analog Devices Inc. AD8032AR-REEL7 Instrumentational OP Amps applications.
- Division circuits
- Broadcasting
- Integrator circuits
- Radar
- ECG equipment
- Mobile phone
- Logarithmic operation circuits
- Subtraction operation circuits
- High input resistance broadband
- Television broadcasting equipment