AD8032ARM-REEL7
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8032 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Operating Supply Current | 3.2mA |
| Nominal Supply Current | 3.2mA |
| Power Dissipation | 600mW |
| Output Current | 15mA |
| Quiescent Current | 900μA |
| Slew Rate | 35V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 450nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Gain Bandwidth Product | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 80000 kHz |
| Voltage Gain | 82dB |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1mV |
| Settling Time | 125 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 80MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.6pF |
| Wideband | YES |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 600mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
AD8032ARM-REEL7 Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. A Voltage Feedback-type buffer amplifier is shown here. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. The pins on this board total to 8 in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 1.5mV voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 3.2mA and 10 . It is recommended to keep the voltage gain at 82dB at all times. The op amp ic has 2 channels on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of the buffer op amp is rated at 5V. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. The current is quiescent at 900μA.
AD8032ARM-REEL7 Features
8 Pins
supply voltage of 5V
82dB voltage gain
Output Type: Rail-to-Rail
AD8032ARM-REEL7 Applications
There are a lot of Analog Devices Inc. AD8032ARM-REEL7 Instrumentational OP Amps applications.
- Communication
- Active probe
- Comparator
- Scintillation detectors
- Division circuits
- Automotive sensors
- Differentiator circuits
- Instrumentation
- Test and measurement instruments
- Fast A/D and D/A converters
