AD8032ARMZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 600mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8032 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Operating Supply Current | 3.2mA |
| Nominal Supply Current | 3.2mA |
| Power Dissipation | 600mW |
| Output Current | 15mA |
| Quiescent Current | 900μA |
| Slew Rate | 35V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 450nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Gain Bandwidth Product | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 80000 kHz |
| Voltage Gain | 82dB |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1mV |
| Settling Time | 125 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 80MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.6pF |
| Wideband | YES |
| Height Seated (Max) | 1.09mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8032ARMZ-REEL Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. The instrumentation amplifier in this picture is of the Voltage Feedback-type. Linear amplifier is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. Linear amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. The op amp ic has an array of 8 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 1.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~85°C. A supply current of 3.2mA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 82dB at all times. On the buffer amps, there are 2 channels that can be used. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage. As a result of this, the buffer amplifier is packed in TAPE AND REEL. There is an 900μA quiescent current running through op amp ic.
AD8032ARMZ-REEL Features
8 Pins
supply voltage of 5V
82dB voltage gain
Output Type: Rail-to-Rail
AD8032ARMZ-REEL Applications
There are a lot of Analog Devices Inc. AD8032ARMZ-REEL Instrumentational OP Amps applications.
- Strain gauges
- Tablets
- Radar
- Industrial control system
- Semiconductor detectors
- Signal amplification
- Thermocouples
- Division circuits
- Communication device
- MP3
