AD8034ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | FastFET™ |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8034 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 7mA |
| Nominal Supply Current | 7mA |
| Output Current | 5mA |
| Quiescent Current | 3.5mA |
| Slew Rate | 80V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 1.5pA |
| Voltage - Supply, Single/Dual (±) | 5V~24V ±2.5V~12V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 80MHz |
| Gain Bandwidth Product | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 92dB |
| Average Bias Current-Max (IIB) | 0.000011μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Gain | 1 dB |
| Settling Time | 90 ns |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Input Capacitance | 2.3pF |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8034ARZ Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Op amps are Voltage Feedback types of amplifier on the chip. A Tube case is used for delivering the op amp. There have been a total of 8 terminations over the past year. Linear amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are included on the operational amplifiers. There is an input offset voltage of 2mV for this buffer op amp. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using a supply current of 7mA , this buffer op amp will be able to operate. 92dB should be the voltage gain. Op amp ic has 2 channels. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. As the name implies, FastFET? refers to the series of the buffer op amp. Linear amplifier has a quiescent current of 3.5mA.
AD8034ARZ Features
8 Pins
supply voltage of 5V
92dB voltage gain
Output Type: Rail-to-Rail
AD8034ARZ Applications
There are a lot of Analog Devices Inc. AD8034ARZ Instrumentational OP Amps applications.
- Polarized electrodes
- Medical instruments
- Cinema or auditorium audio system
- Information processing
- Logarithmic operation circuits
- Portable media players
- Industrial control system
- Wireless base stations
- Video conversion and routing
- High/low-pass filter circuit
