AD8034ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | FastFET™ |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8034 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 7mA |
| Nominal Supply Current | 7mA |
| Output Current | 5mA |
| Quiescent Current | 3.5mA |
| Slew Rate | 80V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 1.5pA |
| Voltage - Supply, Single/Dual (±) | 5V~24V ±2.5V~12V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 80MHz |
| Gain Bandwidth Product | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 92dB |
| Average Bias Current-Max (IIB) | 0.000011μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Settling Time | 90 ns |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Input Capacitance | 2.3pF |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8034ARZ-REEL7 Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called Voltage Feedback-types. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. A total of 8 terminations have been reported in the past few weeks. Linear amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. Instrumentation amplifier is a part of Operational Amplifier. The op amp ic has an array of 8 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 2mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . An 7mA volt supply current is needed for this linear amplifier to operate. 92dB should be the voltage gain. Instrumentation amplifier has 2 channels on it. On the output type, there are Rail-to-Rail different types of op amps. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. The FastFET? stands for the buffer op amp's serial number. 3.5mA quiescent currents are flowing through buffer op amp.
AD8034ARZ-REEL7 Features
8 Pins
supply voltage of 5V
92dB voltage gain
Output Type: Rail-to-Rail
AD8034ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8034ARZ-REEL7 Instrumentational OP Amps applications.
- Medical imaging
- Logarithmic operation circuits
- High-frequency data acquisition systems
- Hand-held batteries
- Radiation thermometry transducers
- Video conversion and routing
- Communication
- Ultrasound transducers
- Proportional counter tubes
- Industrial control system
