Parameters |
Contact Plating |
Lead, Tin |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
CLAMPIN™ |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Max Power Dissipation |
1.3W |
Technology |
HYBRID |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Base Part Number |
AD8036 |
Pin Count |
8 |
Number of Channels |
1 |
Operating Supply Current |
20.5mA |
Power Dissipation |
1.3W |
Quiescent Current |
21.5mA |
Supply Current-Max |
25mA |
Slew Rate |
1200V/μs |
Amplifier Type |
Voltage Feedback |
Common Mode Rejection Ratio |
90 dB |
Current - Input Bias |
4μA |
Voltage - Supply, Single/Dual (±) |
±3V~6V |
Output Current per Channel |
70mA |
Input Offset Voltage (Vos) |
2mV |
Gain Bandwidth Product |
110MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
240000 kHz |
Voltage Gain |
55dB |
Power Supply Rejection Ratio (PSRR) |
50dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6.3V |
Low-Bias |
NO |
Micropower |
NO |
-3db Bandwidth |
240MHz |
Programmable Power |
NO |
Dual Supply Voltage |
5V |
Input Capacitance |
1.2pF |
Neg Supply Voltage-Max (Vsup) |
-6.3V |
Wideband |
YES |
Input Voltage Noise Density |
6.7nV/sqrt Hz |
Height Seated (Max) |
5.33mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
AD8036AN Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp of this type is a Voltage Feedback-type. Linear amplifier is delivered in a Tube case. The number of terminations approaches 8. A total of 8 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. For this electrical component, Through Hole is the recommended mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. It is possible to operate this buffer amplifier from a supply current of 20.5mA . 55dB should be the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. CLAMPIN? corresponds to linear amplifier's series. The quiescent current is 21.5mA.
AD8036AN Features
8 Pins
supply voltage of 5V
55dB voltage gain
AD8036AN Applications
There are a lot of Analog Devices Inc. AD8036AN Instrumentational OP Amps applications.
- Subtraction operation circuits
- Switching amplifier
- Cinema or auditorium audio system
- Semiconductor detectors
- Weak signal detection
- Industrial applications including automation
- single/dual op amp sum and difference circuits
- Active probe
- Information processing
- Proportional counter tubes