AD8036AR
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8036 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 21.5mA |
| Nominal Supply Current | 20.5mA |
| Power Dissipation | 900mW |
| Output Current | 70mA |
| Quiescent Current | 21.5mA |
| Slew Rate | 1200V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 4μA |
| Voltage - Supply, Single/Dual (±) | ±3V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 7mV |
| Gain Bandwidth Product | 110MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 240000 kHz |
| Voltage Gain | 55dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2mV |
| Settling Time | 10 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 240MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Wideband | YES |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | CLAMPIN™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 900mW |
| Technology | HYBRID |
| Terminal Position | DUAL |
AD8036AR Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Op amps are Voltage Feedback types of amplifier on the chip. There is a Tube case that is delivered with the instrumentation amplifiers. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, op amp rates 7mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges -40°C~85°C. Operational amplifier can operate supply current at 21.5mA. You should keep the voltage gain at 55dB for the time being. Instrumentation amplifier has 1 channels on it. This buffer amplifier is assigned within the CLAMPIN? series by its manufacturer. The quiescent current is 21.5mA.
AD8036AR Features
8 Pins
supply voltage of 5V
55dB voltage gain
AD8036AR Applications
There are a lot of Analog Devices Inc. AD8036AR Instrumentational OP Amps applications.
- Ultrasound transducers
- Home audio systems
- High gain DC amplifier
- Power transmission
- Portable electronic products powered by batteries
- Division circuits
- Medical instruments
- Test equipment
- Medical imaging
- Communication device
