AD8036AR-REEL7
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | CLAMPIN™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 900mW |
| Technology | HYBRID |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8036 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 21.5mA |
| Power Dissipation | 900mW |
| Quiescent Current | 21.5mA |
| Supply Current-Max | 25mA |
| Slew Rate | 1200V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 4μA |
| Voltage - Supply, Single/Dual (±) | ±3V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 7mV |
| Gain Bandwidth Product | 110MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 240000 kHz |
| Voltage Gain | 55dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2mV |
| Settling Time | 10 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 240MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Wideband | YES |
| Input Voltage Noise Density | 6.7nV/sqrt Hz |
| Length | 4.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8036AR-REEL7 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called Voltage Feedback-types. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. In total, there are 8 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 7mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . A supply current of 21.5mA can be used to operate this linear amplifier. You should keep the voltage gain at 55dB for the time being. Op amp ic has 1 channels. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. As the name implies, CLAMPIN? refers to the series of the buffer op amp. There is an 21.5mA quiescent current running through op amp ic.
AD8036AR-REEL7 Features
8 Pins
supply voltage of 5V
55dB voltage gain
AD8036AR-REEL7 Applications
There are a lot of Analog Devices Inc. AD8036AR-REEL7 Instrumentational OP Amps applications.
- Wireless base stations
- Multiplication circuits
- Displayers for aircraft and air transportation control systems
- High/low-pass filter circuit
- Gaming industry
- Logarithmic operation circuits
- Broadcasting
- Signal amplification
- Test and measurement instruments
- RF cable systems
