AD8037AR
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | CLAMPIN™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 900mW |
| Technology | HYBRID |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8037 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 18.5mA |
| Nominal Supply Current | 19.5mA |
| Power Dissipation | 900mW |
| Output Current | 70mA |
| Quiescent Current | 19.5mA |
| Slew Rate | 1500V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | ±3V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 280MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 60dB |
| Power Supply Rejection Ratio (PSRR) | 56dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=2 |
| Supply Voltage Limit-Max | 6.3V |
| -3db Bandwidth | 270MHz |
| Bias Current-Max (IIB) @25C | 9μA |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Wideband | YES |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8037AR Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the Voltage Feedback-type. In the case of Tube cases, linear amplifier will be delivered. We are approaching the 8h termination of the year. There are a total of 8 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 2mV voltage. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 18.5mA . 60dB should be the voltage gain. On the buffer amps, there are 1 channels that can be used. In this case, CLAMPIN? represents the instrumentation amplifiers' series number. There is a quiescent current of 19.5mA in this operational amplifier circuit.
AD8037AR Features
8 Pins
supply voltage of 5V
60dB voltage gain
AD8037AR Applications
There are a lot of Analog Devices Inc. AD8037AR Instrumentational OP Amps applications.
- Exponential operation circuits
- Division circuits
- Image computer boards
- Computer workstations
- Signal transformation
- Displayers for aircraft and air transportation control systems
- Communication
- Addition operation circuits
- Professional videography
- Proportional counter tubes
