AD8037ARZ
| Parameters | |
|---|---|
| Slew Rate | 1500V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | ±3V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 270MHz |
| Gain Bandwidth Product | 280MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 60dB |
| Power Supply Rejection Ratio (PSRR) | 66dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=2 |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2mV |
| Settling Time | 10 ns |
| Bias Current-Max (IIB) @25C | 9μA |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | CLAMPIN™ |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 900mW |
| Technology | HYBRID |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8037 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 19.5mA |
| Nominal Supply Current | 19.5mA |
| Power Dissipation | 900mW |
| Output Current | 70mA |
| Quiescent Current | 19.5mA |
AD8037ARZ Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the Voltage Feedback-type. In the case of Tube cases, linear amplifier will be delivered. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 7mV. The mounting type that is recommended for this electrical part is Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 19.5mA . There should be no change in the voltage gain. 1 channels are available on the instrumentation amplifier. Instrumentation amplifiers are numbered by their CLAMPIN? series. There is an 19.5mA quiescent current running through op amp ic.
AD8037ARZ Features
8 Pins
supply voltage of 5V
60dB voltage gain
AD8037ARZ Applications
There are a lot of Analog Devices Inc. AD8037ARZ Instrumentational OP Amps applications.
- Multiplication circuits
- Video data acquisition
- Switching amplifier
- single/dual op amp sum and difference circuits
- Comparator
- Radar
- MP3
- Test and measurement instruments
- Video conversion and routing
- Medical imaging
