AD8038AKSZ-R2
| Parameters | |
|---|---|
| Quiescent Current | 1.5mA |
| Slew Rate | 425V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 400nA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 70dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 350MHz |
| Programmable Power | NO |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Wideband | YES |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8038 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1.5mA |
AD8038AKSZ-R2 Overview
It is packaged in an 5-TSSOP, SC-70-5, SOT-353-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the Voltage Feedback-type. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 5 terminations over the past year. Linear amplifier has a total of 5 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 5 pins are located on the operational amplifiers. The input offset voltage is 500μV. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Operational amplifier can operate supply current at 1mA. Maintain 70dB as the voltage gain. There are 1 channels on the operational amplifiers. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. Buffer amplifier has a quiescent current of 1.5mA.
AD8038AKSZ-R2 Features
5 Pins
supply voltage of 5V
70dB voltage gain
AD8038AKSZ-R2 Applications
There are a lot of Analog Devices Inc. AD8038AKSZ-R2 Instrumentational OP Amps applications.
- Multiplication circuits
- Professional videography
- Navigation
- Radiation thermometry transducers
- Signal filtering
- Communication
- Video conversion and routing
- Industrial applications including automation
- Fission chambers
- Power transmission
