AD8038AKSZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8038 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.5mA |
| Output Current | 15mA |
| Quiescent Current | 1mA |
| Slew Rate | 425V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 400nA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 350MHz |
| Gain Bandwidth Product | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 70dB |
| Power Supply Rejection Ratio (PSRR) | 71dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 500μV |
| Settling Time | 18 ns |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Length | 2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8038AKSZ-REEL7 Overview
In order to protect the op amps, a 5-TSSOP, SC-70-5, SOT-353 case is used. The instrumentation amplifier in this picture is of the Voltage Feedback-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 5. Linear amplifier has a total of 5 pins. This linear amplifier should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The op amp ic has an array of 5 pins on it. With regards to the offset voltage of the input, buffer amplifier is rated at 3mV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 1.5mA . The voltage gain should stay at 70dB. 1 channels are available on the instrumentation amplifier. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. As a result, linear amplifier's quiescent current is 1mA.
AD8038AKSZ-REEL7 Features
5 Pins
supply voltage of 5V
70dB voltage gain
AD8038AKSZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8038AKSZ-REEL7 Instrumentational OP Amps applications.
- Comparator
- pH (acidity)
- Polarized electrodes
- Tablets
- Power transmission
- Voltage regulation circuit
- Displayers for aircraft and air transportation control systems
- Division circuits
- Proportional counter tubes
- Video data acquisition
