AD8038ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8038 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.5mA |
| Output Current | 15mA |
| Quiescent Current | 1mA |
| Slew Rate | 425V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 400nA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 350MHz |
| Gain Bandwidth Product | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 70dB |
| Average Bias Current-Max (IIB) | 0.75μA |
| Power Supply Rejection Ratio (PSRR) | 71dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 500μV |
| Settling Time | 18 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.75μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8038ARZ Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. An op amp ic of the Voltage Feedback type. A Tube case is used for delivering the op amp. The number of terminations approaches 8. A total of 8 pins are located on this board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 3mV voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 1.5mA, this op amp ic can operate. Keeping the voltage gain at 70dB is the best course of action. As far as the device is concerned, buffer amplifier has 1 channels. The quiescent current is 1mA.
AD8038ARZ Features
8 Pins
supply voltage of 5V
70dB voltage gain
AD8038ARZ Applications
There are a lot of Analog Devices Inc. AD8038ARZ Instrumentational OP Amps applications.
- Portable electronic products powered by batteries
- Communication device
- Instrumentation
- Displayers for aircraft and air transportation control systems
- High speed sample
- Video computer boards
- Weak signal detection
- Multiplication circuits
- Semiconductor detectors
- Signal transformation
