AD8039AR-REEL7
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8039 |
| Pin Count | 8 |
| Power Supplies | 5/+-5V |
| Number of Channels | 2 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 3mA |
| Output Current | 15mA |
| Quiescent Current | 1.5mA |
| Slew Rate | 425V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 400nA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 70dB |
| Average Bias Current-Max (IIB) | 0.75μA |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Settling Time | 18 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 350MHz |
| Bias Current-Max (IIB) @25C | 0.75μA |
| Programmable Power | NO |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Wideband | YES |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8039AR-REEL7 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. An op amp ic of the Voltage Feedback type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations approaches 8. There are a total of 8 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 500μV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. As long as the supply current of the chip does not exceed 1mA, this op amp ic can operate. Maintain 70dB as the voltage gain. Op amp ic has 2 channels. This linear amplifier pack is based on the TAPE AND REEL axis. There is an 1.5mA quiescent current running through op amp ic.
AD8039AR-REEL7 Features
8 Pins
supply voltage of 5V
70dB voltage gain
AD8039AR-REEL7 Applications
There are a lot of Analog Devices Inc. AD8039AR-REEL7 Instrumentational OP Amps applications.
- Communication
- Portable docking station
- Multimedia playback equipment
- Power control
- Wireless base stations
- Integrator circuits
- ECG equipment
- Communication device
- Fast A/D and D/A converters
- Band-stop filter
