AD8039ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8039 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3mA |
| Output Current | 15mA |
| Quiescent Current | 1mA |
| Slew Rate | 425V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 400nA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 350MHz |
| Gain Bandwidth Product | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 70dB |
| Average Bias Current-Max (IIB) | 0.75μA |
| Power Supply Rejection Ratio (PSRR) | 71dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 500μV |
| Settling Time | 18 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.75μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8039ARZ Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called Voltage Feedback-types. In the case of Tube cases, linear amplifier will be delivered. The number of terminations is approaching the 8 mark. A total of 8 pins are attached to buffer op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 3mV. Surface Mount is the recommended mounting type for this linear amplifier. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureOperational amplifier can operate supply current at 3mA. Voltage gain should remain at 70dB. Buffer op amp is equipped with 2 channels on the device. Buffer amplifier has a quiescent current of 1mA.
AD8039ARZ Features
8 Pins
supply voltage of 5V
70dB voltage gain
AD8039ARZ Applications
There are a lot of Analog Devices Inc. AD8039ARZ Instrumentational OP Amps applications.
- Non-polarized electrodes
- Vehicle electronics
- MP3
- High gain DC amplifier
- Industrial control system
- Digital cameras
- Automation control systems
- Integrator circuits
- Power transmission
- Logarithmic operation circuits
