Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8039 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Power Supplies |
5/+-5V |
Number of Channels |
2 |
Operating Supply Current |
3mA |
Nominal Supply Current |
3mA |
Output Current |
15mA |
Quiescent Current |
1mA |
Slew Rate |
425V/μs |
Amplifier Type |
Voltage Feedback |
Common Mode Rejection Ratio |
65 dB |
Current - Input Bias |
400nA |
Voltage - Supply, Single/Dual (±) |
3V~12V ±1.5V~6V |
Output Current per Channel |
15mA |
Input Offset Voltage (Vos) |
3mV |
Gain Bandwidth Product |
80MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Voltage Gain |
70dB |
Average Bias Current-Max (IIB) |
0.75μA |
Power Supply Rejection Ratio (PSRR) |
71dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6.3V |
Voltage - Input Offset |
500μV |
Settling Time |
18 ns |
Low-Bias |
NO |
Micropower |
NO |
-3db Bandwidth |
350MHz |
Bias Current-Max (IIB) @25C |
0.75μA |
Programmable Power |
NO |
Input Capacitance |
2pF |
Neg Supply Voltage-Max (Vsup) |
-6.3V |
Wideband |
YES |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8039ARZ-REEL Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Buffer amps of this type are called Voltage Feedback-types. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. The pins on this board total to 8 in total. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 8 pins on this chip. The input offset voltage is 3mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . This op amp can operate from a supply current at 3mA. 70dB should be the voltage gain. On the buffer amps, there are 2 channels that can be used. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. There is a quiescent current of 1mA in this operational amplifier circuit.
AD8039ARZ-REEL Features
8 Pins
supply voltage of 5V
70dB voltage gain
AD8039ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD8039ARZ-REEL Instrumentational OP Amps applications.
- Radiation thermometry transducers
- Exponential operation circuits
- Test and measurement instruments
- Band-stop filter
- Division circuits
- Fission chambers
- Logarithmic operation circuits
- Inverse/same-phase proportional circuit
- High/low-pass filter circuit
- Portable media players