AD8040ARZ-REEL7
| Parameters | |
|---|---|
| Slew Rate | 63V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 1.7μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 170mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 125MHz |
| Gain Bandwidth Product | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 74dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2mV |
| Settling Time | 80 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 2.8μA |
| Programmable Power | NO |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8040 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.35/+-6/2.7/12V |
| Number of Channels | 4 |
| Operating Supply Current | 6mA |
| Nominal Supply Current | 6mA |
| Output Current | 5mA |
| Quiescent Current | 1.5mA |
AD8040ARZ-REEL7 Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. General Purpose-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations approaches 14. Linear amplifier has a total of 14 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this op amp is a type of Operational Amplifier device. 14 pins are included on the operational amplifiers. There is an input offset voltage of 5mV for this buffer op amp. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 6mA and 10 . It is recommended to keep the voltage gain at 74dB at all times. On the buffer amps, there are 4 channels that can be used. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The linear amplifier is packaged by using a TAPE AND REEL axis. Buffer amplifier has a quiescent current of 1.5mA.
AD8040ARZ-REEL7 Features
14 Pins
supply voltage of 5V
74dB voltage gain
Output Type: Rail-to-Rail
AD8040ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8040ARZ-REEL7 Instrumentational OP Amps applications.
- Radar
- Proportional operation circuits
- Portable electronic products powered by batteries
- Micro signal measurement
- Addition operation circuits
- Weak signal detection
- Portable media players
- Comparator
- Subtraction operation circuits
- Navigation
