AD8040WARUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8040 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.35/+-6/2.7/12V |
| Number of Channels | 4 |
| Operating Supply Current | 6mA |
| Nominal Supply Current | 6mA |
| Output Current | 5mA |
| Max Supply Current | 1.3mA |
| Quiescent Current | 1.5mA |
| Slew Rate | 63V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 1.7μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 170mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 125MHz |
| Gain Bandwidth Product | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 74dB |
| Average Bias Current-Max (IIB) | 2.8μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2mV |
| Settling Time | 80 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 2.8μA |
| Programmable Power | NO |
| Screening Level | AEC-Q100 |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AD8040WARUZ-REEL7 Overview
It is packaged in an 14-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. Op amps are General Purpose types of amplifier on the chip. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations approaches 14. In this case, there are 14 pins on the board. This linear amplifier should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 14 pins are located on the operational amplifiers. Op amp rates 5mV as input offset voltage. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. You can run this op amp ic on 6mA . There should be no change in the voltage gain. The op amp ic has 4 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. The Automotive indicates the series number of the op amp. There is a quiescent current of 1.5mA in this operational amplifier circuit.
AD8040WARUZ-REEL7 Features
14 Pins
supply voltage of 5V
74dB voltage gain
Output Type: Rail-to-Rail
AD8040WARUZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8040WARUZ-REEL7 Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- pH (acidity)
- Car stereo
- Navigation
- Voltage regulation circuit
- Portable docking station
- Power transmission
- Comparator
- Laptop
- Measurements of Wheatstone bridge
