AD8041AR
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 900mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | AD8041 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 5.2mA |
| Power Dissipation | 900mW |
| Output Current | 50mA |
| Quiescent Current | 6.5mA |
| Slew Rate | 170V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 1.2μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 7mV |
| Gain Bandwidth Product | 160MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 170000 kHz |
| Voltage Gain | 95dB |
| Average Bias Current-Max (IIB) | 3.5μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2mV |
| Settling Time | 30 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 170MHz |
| Bias Current-Max (IIB) @25C | 3.2μA |
| Programmable Power | NO |
| Input Capacitance | 1.8pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Wideband | YES |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8041AR Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. A Tube case is used to deliver the buffer op amp. It is estimated that there will be at least 8 terminations this year. There are a total of 8 pins on this op amp. This linear amplifier should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are available on the instrumentation amplifier. There is an input offset voltage of 7mV for this buffer op amp. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . You can run this op amp ic on 6.5mA . Maintain 95dB as the voltage gain. There are 1 channels on the operational amplifiers. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. There is a quiescent current of 6.5mA in this operational amplifier circuit.
AD8041AR Features
8 Pins
supply voltage of 5V
95dB voltage gain
Output Type: Rail-to-Rail
AD8041AR Applications
There are a lot of Analog Devices Inc. AD8041AR Instrumentational OP Amps applications.
- Addition operation circuits
- Weak signal detection
- Information processing
- single/dual op amp sum and difference circuits
- Video data acquisition
- Communication device
- High-frequency data acquisition systems
- Hand-held batteries
- Scintillation detectors
- Vehicle electronics
