Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Max Power Dissipation |
900mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8041 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
5V |
Number of Channels |
1 |
Operating Supply Current |
6.5mA |
Power Dissipation |
900mW |
Quiescent Current |
6.5mA |
Slew Rate |
170V/μs |
Amplifier Type |
Voltage Feedback |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
1.2μA |
Voltage - Supply, Single/Dual (±) |
3V~12V ±1.5V~6V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
7mV |
Gain Bandwidth Product |
160MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
170000 kHz |
Voltage Gain |
95dB |
Average Bias Current-Max (IIB) |
3.5μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6.3V |
Voltage - Input Offset |
2mV |
Settling Time |
30 ns |
Low-Bias |
NO |
Micropower |
NO |
-3db Bandwidth |
170MHz |
Bias Current-Max (IIB) @25C |
3.2μA |
Programmable Power |
NO |
Input Capacitance |
1.8pF |
Wideband |
YES |
Length |
4.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8041ARZ-REEL Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Voltage Feedback-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used for delivering the op amp. In recent months, the number of terminations has approached 8. A total of 8 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are located on the operational amplifiers. Regarding input offset voltage, op amp rates 7mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. As long as the supply current of the chip does not exceed 6.5mA, this op amp ic can operate. There should be no change in the voltage gain. Instrumentation amplifier has 1 channels on it. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage. This linear amplifier pack is based on the TAPE AND REEL axis. Linear amplifier has a quiescent current of 6.5mA.
AD8041ARZ-REEL Features
8 Pins
supply voltage of 5V
95dB voltage gain
Output Type: Rail-to-Rail
AD8041ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD8041ARZ-REEL Instrumentational OP Amps applications.
- Polarized electrodes
- Ultrasound transducers
- E-book readers
- Automation control systems
- Communication device
- Measurements of Wheatstone bridge
- Portable docking station
- Scintillation detectors
- Thermocouples
- Comparator