AD8044ANZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Supplier Device Package | 14-PDIP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1.6W |
| Base Part Number | AD8044 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 13.6mA |
| Nominal Supply Current | 13.6mA |
| Power Dissipation | 1.6W |
| Output Current | 30mA |
| Quiescent Current | 3.4mA |
| Current - Supply | 11.5mA |
| Slew Rate | 190V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 6.5mV |
| Bandwidth | 150MHz |
| Gain Bandwidth Product | 80MHz |
| Voltage Gain | 94dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Voltage - Input Offset | 1.4mV |
| Settling Time | 30 ns |
| Current - Output / Channel | 30mA |
| Max Dual Supply Voltage | 6V |
| -3db Bandwidth | 160MHz |
| Min Dual Supply Voltage | 1.5V |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.6pF |
| Number of Amplifiers | 4 |
| Height | 3.43mm |
| Length | 16.89mm |
| Width | 7.24mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8044ANZ Overview
Packaged in a 14-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. Op amps are Voltage Feedback types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tube case. It has 14 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 6.5mV. This electronic component is recommended to be mounted using the mounting type Through Hole. With regard to operating temperature, this op amp functions well at -40°C~85°C. You can run this op amp ic on 13.6mA . There should be no change in the voltage gain at 94dB. On this instrumentation amplifier, there are 4 circuits that are connected together. Op amp ic has 4 channels. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. It should only be used at temperatures up above 85°C. As a whole, there are 4 elements that make up this buffer amplifier. There is a recommendation that this electrical part be used with a supply with 11.5mA current rating. It is important to keep in mind that the power supply voltage of this electric component is below 12V, which is suitable. In order to ensure that the instrumentation amplifier's supply voltage remains above 3V, it is recommended to keep it higher. In order for this electronic part to be conducted successfully, you should use a dual supply voltage of 6V. There is a quiescent current of 3.4mA in this operational amplifier circuit. As you can see, the linear amplifier has 4 amplifiers.
AD8044ANZ Features
94dB voltage gain
Output Type: Rail-to-Rail
AD8044ANZ Applications
There are a lot of Analog Devices Inc. AD8044ANZ Instrumentational OP Amps applications.
- Television broadcasting equipment
- Comparator
- E-book readers
- Polarized electrodes
- Weighing systems
- Instrumentation
- Navigation
- Exponential operation circuits
- Division circuits
- Strain gauges
