AD8045ARDZ-REEL7
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 1.4mV |
| Gain Bandwidth Product | 400MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 63dB |
| Average Bias Current-Max (IIB) | 6.3μA |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 200μV |
| Settling Time | 7.5 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 1GHz |
| Bias Current-Max (IIB) @25C | 6.6μA |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.3pF |
| Wideband | YES |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8045 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 16mA |
| Nominal Supply Current | 16mA |
| Output Current | 70mA |
| Quiescent Current | 19mA |
| Slew Rate | 1350V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 91 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 3.3V~12V ±1.65V~6V |
| Output Current per Channel | 70mA |
AD8045ARDZ-REEL7 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) Exposed Pad case is used. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. We are approaching the 8h termination of the year. A total of 8 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The buffer op amp includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 1.4mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. An 16mA volt supply current is needed for this linear amplifier to operate. Maintain 63dB as the voltage gain. There are 1 channels on the operational amplifiers. The operating supply voltage of instrumentation amplifier is rated 5V voltage. The instrumentation amplifier is packed in the form of TAPE AND REEL. There is an 19mA quiescent current running through op amp ic.
AD8045ARDZ-REEL7 Features
8 Pins
supply voltage of 5V
63dB voltage gain
AD8045ARDZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8045ARDZ-REEL7 Instrumentational OP Amps applications.
- PDA
- High input resistance broadband
- Signal filtering
- Weak signal detection
- Fission chambers
- Oscilloscopes
- Gaming industry
- Test equipment
- Video computer boards
- Information processing
