AD8048ANZ
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.3W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD8048 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 5.9mA |
| Nominal Supply Current | 6.6mA |
| Power Dissipation | 1.3W |
| Output Current | 50mA |
| Quiescent Current | 6.6mA |
| Slew Rate | 1000V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 1μA |
| Voltage - Supply, Single/Dual (±) | 6V~12V ±3V~6V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 260MHz |
| Gain Bandwidth Product | 160MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 68dB |
| Average Bias Current-Max (IIB) | 6.5μA |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=2 |
| Supply Voltage Limit-Max | 6.3V |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 3.5μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Height Seated (Max) | 4.57mm |
| Length | 9.27mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8048ANZ Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. This is a Voltage Feedback type op amp. Linear amplifier is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. The total number of pins on linear amplifier is 8. Please take in mind that this instrumentation amplifier should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 8 pins. Op amp rates 1mV as input offset voltage. This electronic component is recommended to be mounted using the mounting type Through Hole. With regard to operating temperature, this op amp functions well at -40°C~85°C. As long as the supply current of the chip does not exceed 5.9mA, this op amp ic can operate. Op amp is a member of the 68dB's 68dB family. On the buffer amps, there are 1 channels that can be used. There is a quiescent current of 6.6mA in this operational amplifier circuit.
AD8048ANZ Features
8 Pins
supply voltage of 5V
68dB voltage gain
AD8048ANZ Applications
There are a lot of Analog Devices Inc. AD8048ANZ Instrumentational OP Amps applications.
- Voltage regulation circuit
- Video data acquisition
- High/low-pass filter circuit
- Vehicle electronics
- Television
- Digital cameras
- MP3
- Video computer boards
- Car stereo
- Video conversion and routing
