AD8048ARZ-REEL7
| Parameters | |
|---|---|
| Settling Time | 13 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 260MHz |
| Bias Current-Max (IIB) @25C | 3.5μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Wideband | YES |
| Height Seated (Max) | 2.59mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 900mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8048 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 6.6mA |
| Nominal Supply Current | 6.6mA |
| Power Dissipation | 900mW |
| Output Current | 50mA |
| Quiescent Current | 6.6mA |
| Slew Rate | 1000V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 1μA |
| Voltage - Supply, Single/Dual (±) | 6V~12V ±3V~6V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3mV |
| Gain Bandwidth Product | 160MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 68dB |
| Average Bias Current-Max (IIB) | 6.5μA |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=2 |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1mV |
| Gain | 6 dB |
AD8048ARZ-REEL7 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. A Voltage Feedback-type buffer amplifier is shown here. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations is approaching the 8 mark. A total of 8 pins are attached to buffer op amp. This linear amplifier should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . You can run this op amp ic on 6.6mA . 68dB should remain the voltage gain. The op amp ic has 1 channels on it. The linear amplifier is packaged by using a TAPE AND REEL axis. There is an 6.6mA quiescent current running through op amp ic.
AD8048ARZ-REEL7 Features
8 Pins
supply voltage of 5V
68dB voltage gain
AD8048ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8048ARZ-REEL7 Instrumentational OP Amps applications.
- Car stereo
- Voltage regulation circuit
- Weak signal detection
- Signal amplification
- Proportional operation circuits
- Automation control systems
- Oscilloscopes
- Portable electronic products powered by batteries
- Computer workstations
- Information processing
